Видео

Excellent, simple & effective. Exactly the inspiration that will keep your audience coming back for more. Bravo!

Is that Groundhog Day?

TEMU is so good if you don't like the product, they will instantly refund you as soon as they get confirmation you have sent the return,, What you are doing is proving how the real products are ripping us all off , TEMU proves thing's can be made cheaper ,

I did my own. It is indeed great. Thank you so much for sharing!

Any updates 3 years later? Have you finally found "The one"?

Note: the 45° angle isn't "super critical", but it IS very important. If it's off, the miters might join perfectly, but you'll discover that one piece is wider than the other and they don't match.

you get what you paid for.

Thanks!

Could you use a vacuum storage bag, the type for storing clothes and bedding that you use with a vacuum cleaner hose, for something like this?

My dream to build a set.Cheers.P

OMG, I adore your videos. You're hillarious

Did the plans say why there was so much bracing?

Usual Boss video. Simple explanation for the slow kids in the class Much appreciated!!!!!

Does your dust port stay in the same place when u cut 45 degree cuts?

Loved the video, going to try this at home, but although you ended with a great product, I wish you wouldn’t have pushed so hard on the naturalistic fallacy. Tobacco is completely, 100% natural. Definitely going to give you cancer though.

This is a really helpful video, thanks a lot.

Not seeing any work lights or cut line illumination on these WEN tools.

I didn't know you had to watch out for attack trees on the job site 😂

I work for a company that makes industrial sensors, we get customers calling us because their sensor died, we get them in and they are copies made in Bangladesh and China. Sometimes it's obvious, they will spell the name of the company wrong or something else stupid like that. The disturbing part is that they will put hazardous duty rated labeling or a machine safety rating on their counterfit parts, and they aren't tested or really approved to be in an explosive area.

For #3 pocket holes, you attached it incorrectly. The pocket holes should be placed on the outside, other side of the board (flipped around 180 degrees) otherwise it’s a weak joint and not properly done.

That’s 2-3 weeks worth of wine corks??? Guud lawd!!

Jennie and David talk up a good game..but...

When using the Brad nailer turn it 90 degrees. Brad nails are designed to turn left or right. This will reduce the chance of it coming out of the side and going into your fingers. Also make sure to add an angle it’ll make your joint stronger.

I always get a bit of a kick seeing Nova tools overseas, as they're an NZ brand. They also supply the drills and lathes at discounted rates to schools in NZ (and Aussie I think). That little nub on the left hand side is for an interlocked chuck guard to meet safety requirements down these ways. Biggest waste of time ever. 😂

Never mind what the "audiophiles" think, as often they think that a magical power cable (that costs thousands) makes a measurable difference to the output of the amplifier (when the amplifier is run normally). 😂 Never mind some of the crazier ideas like suspending your speaker wires on posts, so that back EMF from the nails/screws holding the flooring down don't affect the audio signal to the speakers. 😂 Chances are that your room isn't a perfect listening setup anyway, so as long as the speaker box is built well (and yours seems to be), it will sound just fine.

I’m amazed how talented some people are. Great job!

whole new meaning to "committed to the bit"

Is it self centering?

Please do an upgrade video showing how you’ll upgrade the little things you don’t like!

Thank you for this video! I’m a contractor who enjoys wood working on the side and it’s easy to get discouraged about tool prices. (I’m also raising a young g family so hobbies are not financial priorities by any means). Would you consider doing a Wen upgrade video where you show us how you upgrade the things you don’t like? ie: track saw grip, miter saw dust collection, etc

There is one thing I see everyone doing when they create these sleds, (and for that matter aligning practically everything about a table saw) that I consider kinda a 'fatal flaw', and that is to align the back board with the blade. The blade always has a chance to be out of line with the table, even if only by a microfraction, so you're creating a sled that's misaligned from the start! The one and only TRUE alignment, is the miter slots themselves, this is the one thing that all measurements should be made from. Albeit it may be more difficult to do!

you can never have enough woodworker youtubers telling woodworkers that you can never have enough woodworkers telling you you can never have enough clamps

I get why you would recommend the turbo plane but most of us out here in the real world can't afford more than 10 bucks for such a tool. Saying that after working for two US armed services and retiring as a firefighter, on a fixed income. You give your life in service to your country and fellow man, and you're lucky if you can eat.

20 dollars difference is 40 meals - that's a huge difference!

Can I use a router sled for the planing step?

I've been woodworking since I was a toddler helping my dad in the shop. I realized watching this I still have the basic shop. At 40 it's probably not gonna change now lol

My ca air tools compressor did the same and it was a different and super expensive model. Worst compressors made for the price.

Im glad you're using the same amount of wax for each because you keep calling the carnuba wax bees wax and the yellow vees wax the carbuba wax lol

Excellent video on when products. Just bought first web Bandsaw thanks

Where did you order the original aluminum legs from??? I’ve been looking for a place to buy metal

Maple isn't a soft wood. It's classified as a "hardwood".

This old, but I just saw it. All I want is which are the good guitar kits?

Damn bro.. thats some machinery there.. dont have all of this. Living in a tiny flat.. want to make some furniture!

I love temu. Cheaply made is better than "american made" for 165,000% more

That table saw looks like the portable DeWalt table saw my old boss owned. I remember turning it on for the first time, and being shocked by how loud that thing was. I actually immediately shut it down, because I was sure something must have been loose inside it. Nope, everything was as it should be. I've used many different jobsite table saws, and never heard one nearly as loud as that thing. I absolutely hated working with that saw, lol.

Never tried ripping a board to width and cutting the power when you’re only halfway through

i wanna do this but with a vertical panel on top to inset my sq1 and monotribe

there is not really a good fence for contractor saws. what you can do since you built the saw into a bench is to built or buy a better fence that is a part of the table and not the saw. You do have to be sure the saw is locked in place or easily precision adjusted if you choose to take that path.

Get the Wen track saw too.

The solution to the Track saw problem is to make the mods to the Bauer saw to fix the plate, and give the saw and the track to your buddy. He's been excellent.